Friday, May 24, 2024
HomePanzerkampfwagen II als Sfl. mit 7.5 cm PaK 40 ‘Marder II’ (Sd.Kfz.131)

Panzerkampfwagen II als Sfl. mit 7.5 cm PaK 40 ‘Marder II’ (Sd.Kfz.131)

Even before the Second World War, the famous German tank commander Heinz Guderian had predicted the need for highly mobile self-propelled anti-tank vehicles, later known as Panzerjäger or Jagdpanzer (tank destroyer or hunter). However, in the early years of the war, beside the 4.7 cm PaK(t) (Sfl) auf Pz.Kpfw. I ohne turm, which was in essence just a 4.7 cm PaK(t) gun mounted on a modified Panzer I Ausf.B tank hull, the Germans did little to develop such vehicles. During the Invasion of the Soviet Union, the Wehrmacht encountered tanks which they had trouble dealing with effectively (T-34 and KV series) and were forced to introduce a number of different hastily built and developed Panzerjäger based on any chassis that was available. From this, a series of vehicles generally known today as the ‘Marder’ (Marten) was created.


During Operation Barbarossa, the Panzer Divisions were once again spearheading the German advance, as in the previous year in the West. Initially, the lightly protected Soviet early tanks (like the BT series and the T-26) proved to be easy prey for the advancing German Panzers. However, the Panzer crews were shocked to discover that their guns were mostly ineffective against the armor of the newer T-34, the KV-1 and KV-2. German infantry units also discovered that their 3.7 cm PaK 36 anti-tank towed guns were of little use against these. The stronger 5 cm PaK 38 towed anti-tank gun was only effective at shorter distances and it had not been produced in great numbers by that time. Luckily for the Germans, the new Soviets tanks were immature designs, plagued by inexperienced crews, a lack of spare parts, ammunition and poor operational use. Nevertheless, they played a significant role in slowing down and eventually stopping the German assault in late 1941. In North Africa, the Germans also faced increasing numbers of Matilda tanks which also proved to be hard to knock out.

The experience gained during the first year of the invasion of the Soviet Union raised a red alert in the highest German military circles. One possible solution to this problem was the introduction of the new Rheinmetall 7.5 cm PaK 40 anti-tank gun. It was first issued in very limited numbers at the end of 1941 and the start of 1942. It became the standard German anti-tank gun used until the end of the war, with some 20,000 guns being built. It was an excellent anti-tank gun, but the main problem with it was its heavy weight, making it somewhat difficult to deploy and hard to manhandle.

The solution to this problem was to mount the PaK 40 on available tank chassis. These new Panzerjäger vehicles followed the same pattern: most were open-topped, with limited gun traverse, and thin armor. Notwithstanding these limitations, they were armed with an effective anti-tank gun, and usually with one machine gun. They were also cheap and easy to build. Panzerjägers were, in essence, improvised and temporary solutions, but effective ones nevertheless. Just as the name suggests (Panzerjäger means “tank hunter” in English), they were designed to engage enemy tanks at long ranges on open fields. Their primary mission was to engage enemy tanks and to act as fire support at long range from carefully selected combat positions, usually on the flanks. This mentality led to a series of such vehicles named Marder that was developed using many different armored vehicles as a basis.

The first series of Marder vehicles was based on captured French armored vehicles. The second series of the Marder II would be produced using the Panzer II tank chassis. The first steps in the Marder II development were undertaken by the Minister of Armament, Albert Speer. On 13th May 1942, he informed Adolf Hitler about the current state of Panzer II production and the possibility of using this tank for the purpose of an anti-tank modification. Hitler was generally interested in this modification and gave a green light for its implementation. Several days later, Speer, with the approval of Hitler, gave instructions to the OKH (German Army High Command) to modify a Panzer II Ausf.F by arming it with the 7.5 cm PaK 40 anti-tank gun (order 6772/42). There was also a second version of the Marder II development earlier in April, but this version was based on the Panzer Ausf.D chassis and armed with the captured Soviet 7.62 cm PaK 36(r) guns.

After a brief period of consideration, Wa Pruef 6 (the office of the German Army’s Ordnance Department responsible for designing tanks and other motorized vehicles) officials chose Rheinmetall-Borsig, Alkett and M.A.N for this task. Rheinmetall-Borsig was charged with adapting the main gun, Alkett with constructing and designing the main superstructure and M.A.N was responsible for modifying the Panzer II chassis. The prototype was to be built by mid-June 1942. On 20th June 1942, a prototype vehicle was presented to the OKH, which proved to be satisfactory and thus it was adopted for production.

The Alkett Marder II prototype. Source:

Panzer II

The first German tank that was produced in great numbers was the Panzer I. As it was armed only with two machine guns and was lightly protected, its combat potential was quite limited. For these reasons, the Panzer II was developed to overcome the many shortcomings of the previous Panzer I model. Its main armament consisted of one 20 mm main gun and one machine gun. The maximum armor protection was initially only 14.5 mm, but it would be increased to 35 mm and even to 80 mm on later versions. It would be produced in several versions with some differences like armor thickness and different suspension, but the armament would remain mostly the same. While its own combat potential was not that great, it was nevertheless used in great numbers (some 1067 were ready in July 1941), as the Germans were still struggling to mass-produce the better Panzer III and IV. By 1942, due to attrition and obsolescence, Panzer II numbers began to dwindle and the surviving vehicles were allocated to be reused for other purposes, most notably for the Marder II and Wespe self-propelled gun.

The Panzer II, despite having lackluster performance on paper, nevertheless represented the backbone of the German Panzer Divisions during the early years of the war. Source:


During its service life, this self-propelled anti-tank gun was known under several different names. On 20th June 1942, it was known as the Pz.Kpfw.II als Sfl. mit 7.5 cm PaK 40. Sfl stands for ‘Selbstfahrlafette’, which can be translated as ‘self-propelled’. The next month, this was changed to 7.5 cm PaK 40 auf Fahrgest.Pz.Kpfw.II. In December 1942, this became 7.5 cm PaK 40/2 auf. Sfl.II. In July 1943, it was known as Panzerjäger II 7.5 cm PaK 40/2 (Sd.Kfz.131). The Marder II name, by which it is best known today, was actually Adolf Hitler’s personal suggestion made at the end of November 1943. In March 1944, the name was changed to Panzerjäger. II für 7.5 cm PaK 40/2 (Sd.Kfz.131). For the sake of simplicity, this article will use the Marder II designation.


For the production of the Marder II, FAMO (Fahrzeug und Motorenwerke GmbH) factories located in Breslau and Warsaw were chosen. According to Panzer-Programm II Plan 14 (dated from the 11th July 1942), the production of the Marder II would commence in July with 30 vehicles. This would then be followed up by 50 in August and September, 57 in October and November, 67 in December, January and February and the last 68 in March 1943. Actual production numbers were much different: 18 in July 1942, 50 in August, 55 in September, 59 in October, 62 in November, 83 in December, 80 in January 1943 and 45 in February. After this, the ‘Wespe’ self-propelled artillery version also based on the Panzer II chassis received a higher priority and was produced on the same lines. In addition, there was a decision to increase the production of Marder III vehicles based on the Panzer 38(t). For these reasons, the production of Marder II was delayed by a few months. Production resumed in May at a reduced pace with 46 being built and with the last 33 being completed in June 1943.

As the Panzer II was considered obsolete by 1942, the Škoda, FAMO and M.A.N companies were contracted to convert any available vehicle (even older versions) into the Marder II. The conversion could be relatively easily carried out by simply removing the Panzer II turret and superstructure. How many were actually built this way is hard to say. The first converted vehicles were not recorded in these registries, as these were included in the standard monthly production. It appears that, from June 1943 to January 1944, less than 68 Panzer IIs were thus converted.

Interestingly, a small number of Marder II were actually built by front units. In late September 1942, the 4th Panzer Division tried to convert three Panzer II into Marder II, but due to lack of main guns, it was not possible. The 12th Panzer Division had more luck and, in June 1943, it transferred 10 Panzer II to the Pz.Inst.Abt. 559 station in the area of Smolensk to be rebuilt in the Marder II configuration.

Some 531 new Marder II tank destroyers were produced, 68 were converted from older vehicles and at least 10 were field conversions. In total, according to T.L. Jentz and H.L. Doyle (Panzer Tracts No.7-2 Panzerjäger), some 609 Marder II were built by FAMO, M.A.N., Daimler-Benz and Škoda.

The number of 531 newly built Marder IIs is also supported by Z. Borawski and J. Ledwoch (Marder II, Militaria), but they state that 75 vehicles were converted. Other sources, like D. Nešić (Naoružanje Drugog Svetsko Rata-Nemačka) or D. Doyle (German military Vehicles) mention that 576 new vehicles and 75 converted vehicles were built.



The suspension of the Marder II was visually the same as on the Panzer II. It consisted of five large 550 x 98x 455 mm road wheels (on each side) which had rubber rims. Above each wheel, on a rocker arm, a quarter elliptical leaf spring unit with a movable roller was placed. The added gun, ammunition, armor and other changes lead to an increase of weight from 9.5 to 11 tonnes. To successfully cope with this extra weight, the Panzer II suspension was additionally strengthened by widening the leaf springs above the wheels. In addition, vertical volute shock absorbers were added on the first, second, and last road wheels on each side. There was also a front drive sprocket (with a diameter of 755 mm), a rear positioned idler (650 mm diameter) and four return rollers (220 mm x 105 mm) on each side. The track had a width of 300 mm with a length of 2400 mm. The total track weight was 400 kg.

While modified, the Marder II suspension was mostly visually the same as that of the Panzer II. Source:


The Marder II engine and its positioning were the same as on the Panzer II Ausf.F. The Maybach HL 62 TR 6-cylinder water-cooled engine giving 140 hp@3000 rpm was located in the rear of the vehicle’s hull. The driveshaft went from the engine through the right side of the crew compartment and was connected to the forward-mounted transmission system. The maximum speed with this engine was 40 km/h and the cross country speed was 20 km/h. The operational range was 190 km on good roads and 125 km cross country. The total fuel capacity for this vehicle was 170 liters stored in two fuel tanks (102 + 68). The Marder II crew compartment was separated from the engine by a 12 mm thick protective firewall.


The Marder II was built using Panzer II Ausf.F (with smaller numbers of older versions) chassis by simply removing the turret and most of the superstructure except for the driver’s compartment. On top of the driver’s compartment, a specially designed mount for the main gun was welded to the hull. Around the gun, an armored superstructure with a relatively simple design was added for the crew protection. These armored plates were slightly angled, but the armor thickness was quite low. The Marder II was an open-top vehicle and, for this reason, a canvas cover was provided to protect the crew from bad weather. Of course, this offered no real protection during combat. Due to the Panzer II’s relatively small size, the crew compartment was cramped. To avoid being hit by enemy fire, the crews were sometimes provided with movable periscopes for observation. Extra equipment like shovels, cables, and spare tracks were usually stored outside the superstructure. Additional storage wooden boxes were often added by the crew for extra equipment.

A rear view of a Marder II crew compartment. Note the periscope behind the head of the crew member on the left. Source:
For bad weather, the crews were provided with a canvas cover. Source:
Close front view of the Marder II superstructure. Source:


The armor thickness of the Marder II hull was relatively thin by the standards of 1942. The front hull armor was 35 mm, sides and rear were only 15 mm and the bottom was 10 mm thick. The driver’s front armor plate was 35 cm thick. The new superstructure was also only lightly protected, with a 10 mm thick front and side armor. The gun was protected by a standard armor shield which consisted of two 4 mm thick separated armored plates.


The main gun chosen for the Marder II was the standard 7.5 cm PaK 40/2 L/46. This gun, with its modified mount, was placed directly on the left side of the Panzer II hull. This was done in order to provide the loader with more working space. The elevation of the main gun was -8° to +10° and the traverse 32° to the left and 25° to the right. The total ammunition load consisted of 37 rounds placed in three ammunition bins located above the engine compartment. The largest, with 24 rounds, was placed on the left side. In the middle, there was space for 7 and the last 6 were in the right ammunition bin. In order to relieve the stress on the elevation and traverse mechanisms during long drives, two travel locks were added, one at the front to support the barrel and one in the crew compartment. Secondary armament consisted of one 7.92 mm MG 34 machine gun with 600 rounds of ammunition and one 9 mm MP 38/40 submachine gun.

Beside the main gun, the crews had an MG 34 at their disposal, which could be mounted on the vehicle’s top right side. Source:
Above the engine compartment, three ammunition storage bins were added. The crew of this vehicle had added an additional wooden box, possibly for spare parts or even more ammunition, Source:
Close up view of the largest ammunition bin. Source:
A travel lock was highly important in order to relieve the stress on the elevation and traverse mechanisms during long drives. Source:
The large size of the 7.5 cm PaK 40 ammunition is evident here. Source:


The Marder II had a crew of three men, which consisted of the commander/gunner, loader and the driver/radio operator, according to the T.L. Jentz and H.L. Doyle (Panzer Tracts No.7-2 Panzerjager). Other sources, for example W.J.K. Davies (Panzerjager, German anti-tank battalions of World War Two), give a number of four crew members. W. Oswald (Kraftfahrzeuge und Panzer) also noted that the crew count was four. Author R. Hutchins (Tanks and Other Fighting Vehicles) mentions that the Marder II could have 3 or 4 crew members. The reason why authors state different numbers of crew members is not clear. To complicate matters further, photographs of the Marder II with both two and three crew members in the rear fighting compartment exist (besides the driver, who was in his own compartment at the front).

This vehicle had two crew members in the fighting compartment. Source:

The driver’s position was unchanged from the original Panzer II. He was the only crew member that was fully protected. The driver was positioned on the vehicle hull’s left side. For observing the surroundings, he was provided with a standard front vision port with two additional smaller ones on each side. The driver could close the visor in combat situations. In this case, he could use the small twin periscope (type K.F.F.2) for observation. This periscope was completely removed from January 1943 on.

The driver could enter his position through the crew compartment or through a small rectangular hatch door in front of his post. He also had to manually release the front travel lock. Source:

Some vehicles were provided with a dummy front visor which was added right of the driver. Its purpose was to fool enemy gunners. The driver could enter his position from the crew compartment or through a small rectangular hatch door in front of him.

This vehicle and the ones in the front appear to have more than two crew members in the crew compartment. Source:
The fake driver vision port is visible here, on the right of the real driver’s visor. Source:

The driver was also the radio operator but, according to authors Z. Borawski and J. Ledwoch (Marder II, Militaria), this task was reassigned to the gunner during the war. The Marder II was provided with a transmitter and receiver radio set and, in addition, with an intercom set. The last but maybe the most important task of the driver was to manually release the forward travel lock. In an unexpected combat situation, this would mean that he had to expose himself to potential enemy fire. For driving at night, initially, two front-mounted headlights were used. Later in production, only one was kept. The commander, who was also the gunner if the crew was only composed of 3 soldiers, was positioned to the left of the main gun. To his right was the loader. The loader also operated the MG 34 used against enemy infantry and soft skin targets. The commander and the driver communicated by using an internal telephone.


Initially, the Marder II was used to equip smaller 9 vehicle-strong anti-tank companies (Panzerjäger Kompanie). These were divided into 3 vehicle-strong platoons (Zuge). By the end of 1942, the number of vehicles per company had increased by one more vehicle. The single added vehicle was used as a command unit (Gruppe Führer) which was also usually accompanied by a command vehicle based on an obsolete Panzer I. This was the case for normal companies attached to Infantry or Panzer Divisions.
In addition, independent army anti-tank battalions (Heeres Panzerjäger Abteilungen) were formed with 13 vehicles per company, which consisted of one command vehicle and three platoons with four vehicles each.

In June 1943, the anti-tank company’s size was increased to 14, with two vehicles given to the command platoon and four vehicles to each platoon. At the same time, the independent army anti-tank battalions received one more command vehicle and the overall strength was to reach 45 operational vehicles in theory. Of course, in reality, due to high demand, insufficient numbers built, and combat losses these numbers were never fully achieved. Due to increased losses and as more advanced anti-tank vehicles were introduced for service, the surviving Marder IIs were mostly allocated to Infantry and Grenadier Divisions in the later stages of the war.

Distribution to the Units

With the production of first Marder II, the OKH ordered the formation of the first anti-tank companies which were to be given to the 3rd, 9th, 13th and 24th Panzer Divisions during the period of July to August 1942. These plans would not materialize as planned and there were some delays in deliveries. Possibly due to lack of 7.5 cm armed Marder II, the 13th Panzer Division was instead supplied with six 7.62 cm armed Marder II vehicles based on Panzer II Ausf.D/E chassis. The 3rd Panzer Division received nine Marder II vehicles in August and three the following month. The 24th Panzer Division did not receive its promised Marder II vehicles until September.

Due to critical situations and high demand for effective anti-tank vehicles in mid-August 1942, a group of 72 Marder Is and IIs were allocated to the Heeresgruppe Mitte on the Eastern Front and distributed to various Infantry and Panzer Divisions. In October 1942, the OKH planned to increase the number of Marder IIs on the Eastern Front by creating four new 36-vehicle strong anti-tank battalions: the 521st, 559th, 611th and 670th. These units were to be formed by the end of 1942. The Soviet counteroffensive around Stalingrad stopped these plans. The Germans were forced to send all available Marder vehicles to reinforce as many SS and Panzer Divisions as possible. This decision meant that Marder II vehicles had to be sent in smaller numbers to equip as many units as possible, which diminished the effectiveness of the units equipped with them. For example, the SS Totenkopf Division had 9 Marder II, 6th Panzer Division had 10, 11th Panzer Division had 10, 17th Panzer Division had 6 and 20th Panzer Division had 13. Some Infantry Divisions were also supplied with Marder II vehicles, like the 206th, 306th and 336th.

During 1943, some fourteen Infantry and Panzer Divisions were supplied with Marder II vehicles, with numbers ranging from 1 to 14 per unit, some probably being reinforcements or replacements for lost vehicles. For example, just one Marder II was given to the 306th Infantry Division in June, 3 were given to the 17th Panzer Division and 14 to the 5th Panzer Division.

Interestingly, the 4th Panzer Division used 18 Marder IIs (out of their 27) to equip the 1st Abteilung of the 35th Panzer Regiment in February 1943. This was done due to a lack of Panzer IVs armed with the longer barreled gun. These Marder IIs would finally be replaced with Panzer IVs in May 1943.

Combat Experience

A report made by the 4th Panzer Division’s 49th anti-tank battalion, based on the experience gained while serving on the Eastern Front, gives a good insight into the Marder II’s general performance.

The main gun was described as having good stability during firing and was capable of penetrating the T-34 hull and turret armor without a problem. There were cases of penetrating the T-34’s turret side armor at a range of 1200 m, along with another case of destroying an American-supplied Lee tank at the same range.

On the negative side, the average rate of fire was only 5 rounds per minute due to the large size of the ammunition and the rear-positioned storage bin. In addition, firing more than 5 rounds caused the accumulation of a smoke cloud in front of the vehicle. Additional problems were the poor quality of the muzzle brake assembly which usually became loose after only 8 to 10 shots. The ammunition load was also noted to be insufficient. In combat situations, this load could be quite quickly spent. In that case, due to a lack of ammunition vehicles, the Marder II had to return to the rear. The recoil during firing the gun would sometimes cause the internal or external spare parts to knock away and the large number of damaged periscopes meant that spare periscopes were in high demand. A huge problem was the lack of armored or even soft skin ammunition and supply carriers.

The armor was weak overall and provided the crew with minimal forward and side protection. The canvas cover was also noted to be of poor quality and was not efficiently protecting the crew and more importantly the onboard equipment (radio etc.) from the weather, which could lead to its malfunctioning. For operations on the Eastern Front, where the weather was quite harsh, this was an important point.

Radio equipment problems were also noted. The main reason for the malfunctions of the radio equipment was the breaking of the sensitive vacuum tubes and other parts due to the strong gun recoil or simply by moving on uneven terrain. The range of the onboard radios was also noted to be insufficient and the installation of the Fu 5 sets was more desirable.

The increase of weight caused some problems with the engine overheating. Another issue was the lack of spare parts for the leaf spring units. The problem with the inadequate command vehicles based on the Panzer I was also noted.

In combat, it was often a practice (albeit unpopular among the Marder II crews) for the local commander to ask for the Marder IIs to be dispersed and used piecemeal in support of the infantry. This tactic was dangerous for the vehicle, as the tank destroyers functioned best working together to destroy enemy vehicles and provide mutual cover. Providing close fire support for infantry was the job of the StuG vehicles which were designed for this role. When used in the infantry support role, the Marder II would stay behind in a well-selected position and provide long-range fire against enemy armor only. It was open-topped, with thin armor and any close engagement could easily lead to losses. The Marder II, despite having a range of 2000 m, could not be used as an artillery weapon due to the small ammunition load which could be quickly expended.

When enemy vehicles were spotted, a Panzerjäger Kompanie’s primary duty was to engage them with any available vehicle. Despite the fact that the 7.5 cm gun could destroy Soviet tanks at great ranges, shooting at distances greater than 1 km was generally to be avoided due to the reduced chance of hitting the enemy and the small ammunition loads. During an attack, the job of the Marder II was to support the Panzers with covering fire from the flanks. It was also a practice for Panzer units to attach a number of light tanks to the Marder II units to act as a defence against possible enemy infantry counter-attacks. In addition, during such operations, attaching infantry support to the Marder IIs was also noted to be important.

When supporting defensive operations, the report mentions that Marder II should not be used as a normal anti-tank gun in a static defensive position. The commander of each company was tasked, in this situation, to make a detailed scouting of the position and indicate the possible directions from which the enemy tanks were likely to attack from. Once these were identified, the Marder IIs were to be used as a mobile reserve. If this was not done by regulation and the Marder IIs were put in front in a static defensive position, there was a huge chance that the enemy would detect them and destroy them from range.

Use in Combat

Unfortunately, for unknown reasons, the sources do not provide precise information about the Marder II during combat operations. While over six hundred were built, the majority would be used on the Eastern front, with smaller numbers on the remaining fronts. During the German attack in the Kursk area, the Marder II distribution was as followed: Heeres Gruppe A had 25 operational vehicles, Heeres Gruppe Sud had 113 operational with 4 in repair, Heeres Gruppe Mitte had 172 operational with 5 in repair, and Heeres Gruppe Nord had 74 operational vehicles. By the end of 1943, the number of operational Marder II was reduced for Heeres Gruppe A to 9 vehicles, Heeres Gruppe Sud to 76 with 43 operational, Heeres Gruppe Mitte to 81 with 62 operational, and Heeres Gruppe Nord had 30 operational vehicles.

Smaller number of vehicles also found their way to the Western Front, with 8 vehicles being positioned in Denmark, 15 in France and 20 in the Netherlands. Smaller numbers were also used in Italy and North Africa.

One of the best known Marder IIs photographed, nicknamed ‘Kohlenklau’ (coal thief). This particular vehicle had an astonishing 20 kill rings painted on the gun barrel. Source:
Having only thin armor protection, a well selected position and camouflage were essential for the crew’s survival. Source:
A number of Marder II saw action in North Africa. Some vehicles were transported by using the large Me-323 Gigant transport planes. Source:
Due to its thin armor protection, the Marder II was an easy target for enemy gunners. Source:

5 cm PaK 38 Marder II

Interestingly, beside the Marder II armed with the powerful 7.5 cm PaK 40 anti-tank gun, there was also a version armed with the weaker 5 cm PaK 38 anti-tank gun. Sources disagree on whether this was a simple field conversion, a limited production series or a prototype vehicle. According to authors Z. Borawski and J. Ledwoch (Marder II, Militaria), a small series of 30 to 50 such vehicles was built in 1944. These vehicles were used on the Eastern Front. According to internet sources, only one field-built vehicle was made and used by Panzerjäger Abteilung 128 of the 23rd Panzer Division. Authors G. Parada, W. Styrna and S. Jablonski (Marder III, Kagero) note that the 5 cm armed version was built in small numbers due to the lack of stronger 7.5 cm guns.

Abandoned 5 cm PaK 38 (to the right) and a 7.5 cm PaK 40 Marder II (to the left), possibly on the Eastern Front. Source:
While its origin is unclear, this conversion had a much simpler superstructure design than the standard produced Marder II. Source:

Night Hunter Version

During 1943, at least one Marder II was used to test the Zielgeraet 1221 night vision equipment. This conversion and testing were carried out at the Army School at Fallingbostel. The night vision equipment consisted of one 500 W infrared reflector that illuminated possible targets with a beam of infrared radiation. The illuminated targets would then be observed by a ZG 1221 electro-optical converter. This system had an effective range of about 600 m. For the needed extra power, a GC 400 electric generator with a HS5F power supply unit was added. Whether this equipment was ever used in combat on a Marder II is unclear.

The Marder II equipped with the experimental night vision equipment. Source: Pinterest

Hungarian Marder II

In June 1941, the Hungarians joined their German allies during the Invasion of the Soviet Union. By 1942, their armored formations were decimated by the Soviet T-34 and KV tanks. The Hungarians mostly fielded 37 to 40 mm gun-armed tanks (Turan I and 38M Toldi), which were of limited utility against the Soviet medium and heavy tanks. To help their desperate allies, during late 1941 and early 1942, the Germans provided them with 102 Panzer 38(t) and a smaller number of Panzer IV vehicles. In December 1942, five Marder II vehicles were also supplied.

These Marder II tank destroyers saw action against Soviet forces with some success. By 9th February 1943, due to extensive combat with the Soviets, only two Marder II vehicles were still operational. These vehicles would be returned to the Germans in the summer 1943. The Hungarians tried to build their own self-propelled anti-tank vehicle inspired by the Marder II. This vehicle was based on the Toldi I tank and armed with a German 7.5 cm PaK 40, but only one prototype was ever built.

Only five Marder II vehicles were supplied by the Germans by the end of 1942. The Hungarian Marder IIs managed to achieve limited success. Source: Pinterest

Surviving vehicles

Today, there are four surviving Marder II vehicles, with one at the National Armor and Cavalry Museum, Fort Benning (USA), one in Kubinka (Russia) and one at the Arsenalen Tank Museum Strängnäs (Sweden). Another Marder II that was in the US was given to the German Auto und Technik Museum in Sinsheim in 1989. The Swedish Marder II was acquired from Denmark late 1945 for evaluation.

The Swedish Marder II. Source:


The Marder II tank destroyer was an attempt to solve the problem of the low mobility of towed anti-tank guns, but it failed in many other aspects. The low armor thickness meant that, while it could engage enemy tanks at range, any kind of return fire would likely mean the destruction of this vehicle. The small ammunition load was also problematic for its crew. Even so, while the Marder II vehicles were not perfect, they gave the Germans a means to increase the mobility of the effective PaK 40 anti-tank gun, thus giving them a chance to fight back against the numerous enemy armored formations.

Sd.Kfz.131 specifications

Dimensions 6.36 x 2.28 x 2.2 meters (20,86 x 7.48 x 7.21 feet
Total weight, battle ready 11 tonnes (24250,8 lbs)
Crew 3 (Commander/Gunner, Loader and the Driver/Radio operator)
Propulsion Maybach HL 62 TR 140 HP @ 3000 rpm
Speed 40 km/h, 20 km/h (cross country)
Operational range 190 km, 125 km (cross country)
Primary Armament 7.5 cm PaK 40/2 L/46
Secondary Armament 7.92 mm MG 34
Elevation -8° to +10°
Traverse 25° to the right and 32° to the left
Armor Superstructure 4-10 mm (0.14 – 0.39 inches)
Hull 10-35mm (0.39 – 1.37 inches)

Most Popular