This lightweight, multi-role fighter can be found in air forces throughout the world—and for good reason.
When U.S. Air Force Captain Gary “Nordo” North took off as leader of a flight of four F-16s on a December morning in 1992, the Fighting Falcon was already a globally respected—and feared—fighter. By then, more than 2,500 F-16s had been delivered worldwide, amassing nearly 5 million flight hours.
But that Sunday morning, North cared only about the two-seat F-16D he was flying, and the three others from his “Top Hats” 310th Fighter Squadron. They were aloft on the border of southern Iraq as part of Operation Southern Watch, patrolling the no-fly zone that the U.S., U.K., and France had established following the Gulf War.
As the flight met up with a KC-135 tanker, North and his backseater in “Benji 41” (the F-16D’s call sign) heard intense communications between another flight of four F-15 Eagles and an E-3 AWACS airborne control aircraft. An Iraqi Air Force (IQAF) MiG-25 Foxbat had crossed into the no-fly zone, baited the Americans, and hustled back north at supersonic speed with the F-15s in chase.
In full afterburner, the Eagles quickly exhausted their fuel and were forced to leave. That left Nordo’s F-16s as the go-to American fighters in the area. As described in Craig Brown’s Debrief: A Complete History of U.S. Aerial Engagements, North and his wingman cut their refueling short, taking on only enough gas to cover their assigned patrol time and leaving the two remaining Top Hats to fully refuel.
Almost immediately, AWACS controllers vectored the pair of F-16s toward another Iraqi MiG heading for the no-fly zone, which quickly turned back north. In quick succession, the E-3 picked up two more Iraqi fighters. Each time North’s F-16s turned toward them, they turned away from the no-fly zone. But a third, entering the zone 30 miles west at 30,000 feet, kept flying east—straight toward Benji 41.
While the other two F-16s scrambled to the area from the tanker, Nordo lit his afterburner, turning his jet and his wingman north to trap the MiG south of them in the no-fly zone. The IQAF fighter couldn’t flee back to Iraqi territory without a fight.
“Someone was going to die within the next two minutes,” North recalled, “and it wasn’t going to be me or my wingman.”
In addition to two short-range AIM-9 Sidewinder missiles, Benji 41 was carrying a pair of AIM-120 Advanced Medium-Range Air-to-Air Missiles (AMRAAMs) on its wingtips. North visually picked up the MiG-25 eight miles off his nose. Calling the E-3 for clearance to fire, he also told his wingman to go active with his electronic jamming pod. A long 15 seconds later, North heard “Cleared to kill, cleared to kill, Bandit, Bandit!” from the AWACS controller.
Nordo fired an AIM-120, calling “Fox!” as it came off his wingtip. The AMRAAM closed on the MiG-25 at Mach 4, shattering it into three large pieces and a fireball in seconds. Diving in afterburner, North and his wingman scooted south at top speed.
Despite almost two decades of service, North’s was the first aerial kill for an American F-16.
The Lightweight
As with every fourth-generation U.S. fighter, the F-16 was defined by the Air Force’s experience in Vietnam. In the late 1960s, former Air Force fighter pilot Colonel John Boyd and a group of fighter technology analysts known as “the Fighter Mafia” called for development of a highly maneuverable, lightweight fighter aircraft that would be an alternative to heavy, complex fighters like the F-4 Phantom, F-14 Tomcat, and F-15 Eagle—some of which were still in design stages.
This idea gained funding and quickly evolved into the Lightweight Fighter (LWF) program. In February 1972, six manufacturers submitted design proposals, all based on two prime considerations: turning radius and acceleration.
Two months later, the General Dynamics Model 401-16B and the Northrop P-600 were chosen for development and a 300-hour fly-off at Edwards Air Force Base in California. Known as YF-16 and YF-17, the prototypes both weighed in at about 20,000 pounds empty, which was relatively light compared with the 28,000-pound F-15 and the 40,000-pound F-14.
A team including General Dynamics chief designer Harry Hillaker rolled the YF-16 out in December 1973, just 21 months after the development contract was placed. The diminutive, largely aluminum single-engine design incorporated a cropped delta wing blended with the fuselage body. Forward wing strakes, an underslung intake, and aft underbody ventral fins contributed to a dynamically unstable configuration, controlled by the world’s first fly-by-wire production flight control system.

Hulton Deutsch / Fox Photos//Getty Images
Combined with a 23,840-pound-thrust Pratt & Whitney F100-PW-100 afterburning turbofan, the purposely unstable design offered a 1.4-to-1 thrust-to-weight ratio, eyeball-popping 9G maneuver capability, and exceptional pilot visibility under a frameless bubble canopy.
But the YF-16 still needed to provide itself against Northrop’s competition. After 10 months of testing, it was clear that the YF-16 had significantly better maneuverability, a longer range, and a lower cost than the YF-17. In January 1975, the Air Force pronounced it the winner of the competition and said Uncle Sam would buy at least 650 of them. But the YF-17 didn’t disappear into obscurity; it would go on to form the bones for the U.S. Navy’s future F/A-18 Hornet.
The F-16 Reaches Fighter Fame

Despite its initial lightweight, day-fighter emphasis, the F-16 would immediately develop into a multi-role fighter-bomber. As the LWF was underway, NATO allies Belgium, Denmark, the Netherlands, and Norway were on the lookout for a replacement for their Lockheed F-104G Starfighter fighter-bombers. The similarly sized, single-engine YF-16 fit perfectly.
The USAF was also looking to cost-effectively replace the fighter-bomber capabilities of its F-105s and F-4s with an aircraft that could mix with the air-superiority-focused F-15. These imperatives drove changes to the first production F-16s, which included a longer fuselage (by 10.6 inches), increased wing area, larger ventral fins, and two more underwing weapons stations. A larger nose radome also accommodated a Westinghouse AN/APG-66 radar. As a result, weight was increased by 25 percent over the YF-16.
The U.S. Air Force accepted its first production F-16A in January 1979. The 34th Tactical Fighter Squadron became the first unit to fly the F-16, which was officially named “Fighting Falcon” in July 1980. By that time, two European production lines had been started and the Belgian, Royal Netherlands, and Norwegian air forces began receiving F-16As. So did the Israelis.
The Israeli Air Force (IAF) called the F-16 “Netz” (Hawk) and threw it into combat less than a year after taking delivery. In July 1981, the IAF launched Operation Opera, which saw eight F-16As, each carrying two unguided 2,000-pound bombs, boldly fly into Iraq escorted by six IAF F-15As, where they struck a nuclear reactor.

Gilbert UZAN//Getty Images





